Clamps and Supports
World Precision Instrument Steel Base Plate, 32 lbs
Base plate - Mounting surface for magnetic stands
A magnetic stand requires a steel mounting serface. WPI's steel base plates have plenty of mass to give stability to your experimntal setup. Beveled edges make them easy to handle. Rubber feet hold them off the benchtop, making them easier to grasp when you are moving them. The special black coating provides a durable, protective, non-reflective finish.
World Precision Instrument Vessel Clip, Full Curve
WPI's Full Curve Vessel Clip is a surgical instrument for use in microvascular procedures, where extremely small blood vessels and delicate tissues are involved. WPI Vessel Clips are designed to occlude fine blood vessels with precise control. These clips are made of German stainless steel and have 1 x 6mm jaws. These ligating vessel clips can tie off blood vessels or other tissues. Vessel clips are durable and withstand the stresses of surgery, ensuring that they remain securely in place throughout the procedure. Pinch the handle to release pressure and position the vessel clip. Then, release the handles to clamp the tissue or vessel securely. The size of the vessel clip you need can vary depending on the size of the vessel or tissue being occluded. These vessel clips are manufactured from German grade stainless steel, and they are suitable for autoclaving or chemical sterilization. Always clean surgical instruments thoroughly and promptly.
World Precision Instrument Base Weight
Sturdy base for the M3301 micromanipulator
This 5-lb weight is for the Tilting Base and provides more stability for your micromanipulator. It is 1"x2.3"x5.1" (25.4 x 60 x 130mm) and has an M6 screw hole for mounting the tilting base.
World Precision Instrument Magnetic Stand - Flexible
The base of each stand exerts a powerful magnetic force that holds it solidly on ferrous metal surfaces - even vertically or upside down
The arm of this magnetic base bends freely for maximum flexibility. The connecting arm twists and bends like a snake. Lock the arm in position with a flick of the controlling lever. These are an ideal stands probe holders and lightweight objects.
World Precision Instrument Vessel Clip, Straight, 0.8 x 6mm Jaw, German
Micro Vessel Clips are a surgical instrument for use in microvascular procedures, where extremely small blood vessels and delicate tissues are involved. WPI Micro Vessel Clips are significantly smaller than standard surgical clips, because they are designed to occlude fine blood vessels with precise control. These clips are made of German stainless steel and come in a couple of sizes. These ligating vessel clips can tie off blood vessels or other tissues. Micro vessel clips are made to be durable and withstand the stresses of surgery, ensuring that they remain securely in place throughout the procedure. Pinch the handle to release pressure and position the vessel clip, or release the handles to clamp the tissue or vessel. The size of the vessel clip you need can vary depending on the size of the vessel or tissue being occluded. These are available with 0.8x6mm, and 0.75x4mm jaws.
World Precision Instrument M10L Magnetic Stand
The base of each stand exerts a powerful magnetic force that holds it solidly on ferrous metal surfaces - even vertically or upside down
This magnetic base is the same as the M10 (12mm diameter sub pole), but it is equipped with a taller (14-inch) vertical main pole. These are an ideal manipulator stands.
World Precision Instrument Manipulator Mounting Clamp, 1/2-inch
Mount your manipulator
- Diameter: 1/2-inch clamp
- Interchangeable clamp allows manipulator to be mounted on a variety of supports
Chemglass Life Sciences Clamp, Keck, Green, Standard Taper, Fits Joint Sizes 10/13 & 10/29
Clamp, Keck, Green, Standard Taper, Fits Joint Sizes 10/13 & 10/29. Made of Delrin, the clamp is non-corrosive and will not scratch glass. Can be used to 140 C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
Chemglass Life Sciences Arm, Flexible, 18"
Arm, Flexible, 18". Flexible arm replacement part for CG9214 series of flexible clamps.
Chemglass Life Sciences Flexible Clamp Kit, 12" Arm
Flexible Clamp Kit, 12" Arm. Flexible clamp for use in clamping laboratory apparatus that are normally difficult to hold due to their size, shape or odd angles. Unique flexible arm can be placed in virtually any position or angle. Available with a choice of a 12 or 18 inch long flexible arm. Complete item consists of a two-prong clamp head, three-prong clamp head, spring clamp head, flexible arm and a lab frame connector with utility wrench. Base plate and bench clamps are available as optional items.
Chemglass Life Sciences Large Universal Kwik Klamp II
Large Universal Kwik Klamp II. Universal Kwik Klamp II is constructed of aluminum that has a chemically resistant Hardcote and PTFE anodized finish. Versatile design can be used on 1/2” OD Rod. The large Klamp attaches to 2” pipe (2.375” OD). Useful in attaching temperature monitors or controllers, additional supports and clamps. The optional CG-3498-03 1/2” OD rod, bent 90° is necessary when supporting a temperature monitor or controller to a reactor stand or laboratory hood lattice.Features:• Heavy Duty Design• Corrosion Resistant• Large Clamping Knobs• Universal Design Securely Fastens To 10L Through 100L Reactor Frames And Stationary Or Mobile Benchtop Stands• 1/2" Diameter Rod Commonly Used For Lattice In Hoods• Clamps and Support Rods Can Be Mounted Horizontally Or Vertically• Secure Up To Four Different Rods, Clamps Or SupportsLarge Kwik Klamp II for use with: CG-1968-X Support Frame
Chemglass Life Sciences Clamp, PTFE, 14/20
Clamp, PTFE, 14/20. PTFE molded clamps with a steel core can withstand temperatures up to 250°C and are totally chemically resistant and inert.
Chemglass Life Sciences Universal Ridge Kwik Klamp II
Universal Ridge Kwik Klamp II. Universal Kwik Klamp II is constructed of aluminum that has a chemically resistant Hardcote and PTFE anodized finish. Versatile design can be used on 1/2” OD Rod. Useful in attaching temperature monitors or controllers, additional supports and clamps. The optional CG-3498-03 1/2” OD rod, bent 90° is necessary when supporting a temperature monitor or controller to a reactor stand or laboratory hood lattice.Features:• Heavy Duty Design• Corrosion Resistant• Large Clamping Knobs• Universal Design Securely Fastens To 10L Through 100L Reactor Frames And Stationary Or Mobile Benchtop Stands• 1/2" Diameter Rod Commonly Used For Lattice In Hoods• Clamps and Support Rods Can Be Mounted Horizontally Or Vertically• Secure Up To Four Different Rods, Clamps Or SupportsRidge Klamp for use with: CG-1968-X Support Frame